![]() If you have several perspectives of your drawing that require printing, using page setups is the most efficient way to print. You can make adjustments to the print settings each time you print, but you can also create page setups, which save the print settings and assign them to different lay-outs in your drawing. If for example your print is 2% too small in Y direction, set Factor Y to 1.02.Most drawings require adjustments to print settings in order to print the way you want. You can calibrate your printer under Edit > Application Preferences > Printer Settings > Calibration. Printers are not 100% accurate and paper expands / contracts depending on temperature and humidity. ![]() In this example it is checked and needs to be unchecked (click the button to uncheck it): Make sure that the button to toggle the hairline mode is not checked.If the above does not solve the problem, please make sure that the hairline mode is not enabled for your drawing: Avoid line weight "Default" as this prints at minimum width and might not be visible. Select the layer which prints too fine, then choose Layer > Edit Layer and change the width to something thicker. Line widths are usually controlled through layer properties. If your print out is very light or fine (thin lines), you might want to adjust the widths of your entities. To export the drawing with the chosen layout to PDF, choose File > PDF Export. To print the drawing, choose File > Print. Step 3: Printing / PDF Export Printing on Paper If you have chosen to print to multiple pages, the pages are shown beside / below each other:.If the purple rectangle crosses your drawing, please check the glue margins in the drawing preferences. If your drawing is shown on a gray background, please check your paper and scaling settings again. Your drawing should be shown on a white paper as shown here:.To print in black / white or gray scale, click the appropriate icon in the options toolbar:.Optionally, adjust the paper position using the tool Move Paper Position or use the button to center the drawing on the chosen paper(s).If the desired scale of your drawing is not known or irrelevant, click the button to adjust the drawing scale to the chosen paper. 1:2, 1:10, 2:1, 200:1, etc.), adjust the scale to the accurate, desired scale (2:1 in this example). If the desired scale for printing is known (e.g.In the same dialog page, you can also adjust the number of columns and rows to use when printing to multiple pages.Ĭhoose File > Print Preview to switch to the print preview mode.These margins are used as overlap when printing to multiple pages but also influence the tools to automatically fit or center the drawing on paper: ![]() Check and adjust Printing > Multi Pages > Glue Margins.Check and adjust Printing > Page > Paper Size and Scale (if known):.Check and adjust the drawing unit and paper unit under General > Drawing Unit:.Edit > Drawing Preferences (NOT Application Preferences).Open the DXF/DWG file you want to print.The same scale should be applied to text labels and dimension properties (dimension arrows, labels, gaps, etc.).Īlternatively, you can use layout blocks and viewports to create a layout of your drawing border and drawing as described in Tutorial: Layout Blocks and Viewports. insert it five times larger than you want it to print. For example, if your drawing is to be printed with a scale of 1:5 (factor 0.2 or five times smaller than real size), scale your drawing border or drawing header with a factor of 5, i.e. If your drawing has a drawing border or header, scale the border or header instead of scaling your drawing. ![]() You can scale your drawing by any given factor using the Modify > Scale tool if necessary. If this is not the case for your drawing, you might want to correct this before proceeding. Drawings are almost always drawn in real size (1:1) with a CAD system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |